Aluminum Alloy CNC Machining | PEEK & PI Plastic CNC Machining Manufacturer | Shen-Yueh (SYT)
Aluminum alloy parts are widely used in various industries, such as the upper and lower electrodes in semiconductors, and carriers in the optical lens industry. The precision of general products can reach 0.02mm (special requirements can be discussed separately).
Aluminum alloy is characterized by its light weight, only 1/3 of steel, and can be used for a variety of surface treatments, such as anode, hard anodization, chemical nickel, Teflon coating, gold plating, and silver plating. It can be dyed various colors, and can be used aesthetically as well as because of its special chemical resistance and insulation.
Aluminum alloy is classified, including aluminum magnesium alloy (5052, 5083), aluminum magnesium silicon alloy (6061), aluminum zinc magnesium alloy (7075), MIC6, etc. Depending on the method of use and the environment, different aluminum materials can be used, such as high hardness aluminum used in semiconductor high vacuum chamber processing, welding, hard anodization, and in the aerospace industry. Shen-Yueh (SYT) is a high-quality Aluminum Alloy CNC Machining, Shutters are made from blackened-surface, single-side, mirror-treatment aluminum alloy, 0.3mm at the thinnest, and used in the semiconductor high-temperature reflection process. manufacturer from Taiwan since 2006.
Aluminum Alloy CNC Machining
A5052 / A5083 / A6061 / A7075 / MIC6
Aluminum alloy parts are widely used in various industries, such as the upper and lower electrodes in semiconductors, and carriers in the optical lens industry. The precision of general products can reach 0.02mm (special requirements can be discussed separately).
Aluminum alloy is characterized by its light weight, only 1/3 of steel, and can be used for a variety of surface treatments, such as anode, hard anodization, chemical nickel, Teflon coating, gold plating, and silver plating. It can be dyed various colors, and can be used aesthetically as well as because of its special chemical resistance and insulation.
Aluminum alloy is classified, including aluminum magnesium alloy (5052, 5083), aluminum magnesium silicon alloy (6061), aluminum zinc magnesium alloy (7075), MIC6, etc. Depending on the method of use and the environment, different aluminum materials can be used, such as high hardness aluminum used in semiconductor high vacuum chamber processing, welding, hard anodization, and in the aerospace industry.
Application of Aluminum Alloy in Semiconductors
Aluminum alloy material in semiconductor devices is used widely, generally on recessed parts. After sulfuric acid hard anodization and oxalic acid hard anodization processing, the surface is in an insulation state, resistant to corrosive gas and high voltages in the etching process. After long periods of use, surfaces can undergo treatment again, restoring the product to new.
Aluminum Alloy Features
1. Lightweight, specific gravity of 2.7.
2. Electrical conductivity is 60% of copper, and specific gravity is 1/3 of copper.
3. Convenient for all kinds of surface treatment.
4. Easy to process, fast processing speed and low cost.
5. It can be applied to a wide range of traditional, science and technology, aerospace and biotechnology industries.
6. High heat resistance, up to 400 degrees or above.
Aluminum Alloy Processing Performance
-
Semiconductor vacuum parts: anodized, non-conductive, excellent processing properties and tolerance. -
Vacuum adapter seats: partially dyed black; non-dyed part is the vacuum surface, free from fine lines and scratches, and fully meeting requirements. -
Measuring equipment used parts: hard surface anodization treatment to increase surface hardness and insulation. -
The surface of aluminum alloy is red anodized for enhanced aesthetics. -
DDR slots: green treatment and groove processing to protect memory products. -
After dying black, the number is engraved for use in optical equipment.
Popular Products
Shutters are made from blackened-surface, single-side, mirror-treatment aluminum alloy, 0.3mm at the thinnest, and used in the semiconductor high-temperature reflection process. | PEEK & PI Plastic CNC Machining Manufacturer | Shen-Yueh (SYT)
Located in Taiwan since 2006, Shen-Yueh Technology co., Ltd. has been a CNC plastic and metal machining manufacturer in Metal Processing Industry. Their main CNC machining supplies include, Aluminum Alloy CNC Machining, CNC plastic machining, air knife productions, PEEK plastic machining and fabrication, CNC metal machining, Polyimide (PI) plastic CNC machining and milling, and bearing, which are delivered with expanded production capacity, short lead time, and better customer service.
SHEN-YUEH is composed of semiconductor equipment and machining design personnel who cooperate with the CNC professional technician team, which has more than 10 years of experience. The production process is carried out in accordance with ISO and a clean factory environment to provide excellent professional consultations and service! We focus on CNC parts processing and equipment transformation experience in the semiconductor and panel industries (since 2006). For more than 10 years, we have solved problems of design, development, and organization optimization and increased the lifecycle of parts, reducing costs for many customers and quickly providing manufacturing samples to reduce customer development time.
Shen-Yueh (SYT) has been offering high-quality equipment part manufacturing for semiconductor manufacturing department, panel and comprehensive industries, both with advanced engineering technology and 13 years of experience, Shen-Yueh (SYT) ensures each customer's demands are met.